The tilting disc check valve is a type of check valve that is designed to allow fluid to flow in one direction while preventing backflow in the opposite direction. It features a disc or flap hinged at the top of the valve, which tilts to allow forward flow and closes to prevent reverse flow.These valves are commonly used in a variety of industries such as oil and gas, chemical processing, and water treatment due to their ability to provide reliable backflow prevention and efficient flow control. The tilting disc design allows for quick response to changes in flow direction, minimizing pressure loss and helping to prevent water hammer.Tilting disc check valves are available in various configurations and materials to suit different applications and operating conditions. They are often chosen for applications where high flow rates and low pressure drop are important, as well as where space and weight considerations are a factor.When selecting a tilting disc check valve, it's important to consider factors such as the type of fluid, pressure, temperature, and flow rate, as well as any special requirements of the specific application.If you need more detailed information about tilting disc check valves, specific product recommendations, or assistance with selecting the right valve for your needs, feel free to reach out for further assistance.1. Double eccentric valve disc. When closed, the valve seat gradually contacts the sealing surface to achieve no impact and no noise. 2. Micro-elastic metal seat, good sealing performance. 3. Butterfly disc design, quick switch, sensitive, long service life. 4. The swash plate structure streamlines the fluid channel, with small flow resistance and energy saving effect. 5. Check valves are generally suitable for clean media, and should not be used for media containing solid particles and large viscosity.As a professional Tilting Disc Check Valve manufacturer and exporter, we promise to provide customers with high-quality after-sales service, including the following: 1.Provide product usage guidance and maintenance suggestions. 2.For failures caused by product quality problems, we promise to provide technical support and troubleshooting within the shortest possible time. 3.Except for damage caused by normal use, we provide free repair and replacement services. 4.We promise to respond quickly to customer service needs during the product warranty period. 5. We provide long-term technical support, online consulting and training services. Our goal is to provide customers with the best service experience and make customers' experience more pleasant and easy.

Product	Tilting Disc Check Valve
Nominal diameter	NPS 1/2”, 3/4”, 1”, 1 1/2”, 1 3/4” 2”, 3”, 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”, 20”, 24”, 28”, 32”, 36”, 40
Nominal diameter	Class 150, 300, 600.
End Connection	BW, Flanged
Operation	Handle Wheel, Pneumatic Actuator, Electric Actuator, Bare Stem
Materials	A105, A350 LF2, A182 F5, F11, F22, A182 F304 (L), F316 (L), F347, F321, F51, Alloy 20, Monel, Inconel, Hastelloy, Aluminum Bronze and other special alloy.
Structure	Outside Screw & Yoke (OS&Y)，Bolted Bonnet, Welded Bonnet or Pressure Seal Bonnet
Design and Manufacturer	ASME B16.34
Face to Face	ASME B16.10
End Connection	RF, RTJ (ASME B16.5)
	Butt Welded
Test and Inspection	API 598
Other	NACE MR-0175, NACE MR-0103, ISO 15848
Also available per	PT, UT, RT,MT.

During the opening and closing process of the forged steel globe valve, because the friction between the disc and the sealing surface of the valve body is smaller than that of the gate valve, it is wear-resistant. The opening or closing stroke of the valve stem is relatively short, and it has a very reliable cut-off function, and because the change of the valve seat port is proportional to the stroke of the valve disc, it is very suitable for the adjustment of the flow rate. Therefore, this type of valve is very suitable for cut-off or regulation and throttling.